Philips Amara View Full Face Mask (fitpack S/M/L)

Philips Amara View is designed for people who need the performance of a full face CPAP mask without the bulky, closed-in feeling of traditional designs. Instead of sitting on the bridge of the nose, Amara View uses an innovative under-the-nose cushion that seals around the mouth and just beneath the nostrils. This reduces contact points on the face and helps prevent the nose-bridge pressure marks and irritation many users experience with standard full face masks.

Because there is no large frame or cushion in front of your eyes, the mask offers a wide field of vision, making it easier to wear glasses, read, or watch TV while you wind down for the night. The compact, lightweight frame and soft headgear are designed to stay stable at a wide range of therapy pressures, including higher pressures often used for moderate to severe obstructive sleep apnea.

Key Features & Benefits

• Minimal contact, under-the-nose design
  The cushion sits under the nose and around the mouth, avoiding the bridge of the nose. This helps reduce red marks, discomfort and skin irritation while still delivering effective full face therapy.

• Wide, open field of vision
  With no bulky forehead support or large frame in front of your eyes, Amara View lets you read, use your phone or tablet, or watch TV before sleep. Many new users report feeling less confined compared with traditional full face masks.

• Lightweight frame and soft headgear
  The compact frame and soft, fabric-covered straps are designed to distribute pressure gently and keep the mask stable during position changes, making it suitable for many back- and side-sleepers.

• Magnetic / quick-release clips
  Convenient clips allow fast attachment and removal of the headgear without re-adjusting the straps every night. This is especially helpful when getting up at night or putting the mask on in a dark bedroom. (Note: availability of magnetic clips depends on local configuration.)

• Short tube with 360° swivel & quick-release elbow
  A flexible short tube and swivel elbow connect the mask to the main CPAP hose, reducing pulling on the mask and allowing more freedom of movement during sleep. The quick-release elbow lets you disconnect from the tubing without removing the mask.

• One modular frame for all cushion sizes
  The same mask frame fits all cushion sizes (S, M, L), simplifying sizing and making it easier to swap cushions if your size changes.

• Easy to clean and maintain
  The mask is designed for quick assembly and disassembly; key parts separate easily for routine cleaning. Some third-party vendors note that the frame components are dishwasher safe (top rack; always follow the official Philips instructions for cleaning).

Intended Use & Compatibility

Amara View is a full face CPAP / BiPAP mask designed for adult patients who breathe through the mouth, or who require a full face interface for effective treatment. It can be used with most standard CPAP, bilevel and ventilator devices that use a standard 22 mm hose connection. Typical indications include:

• Obstructive sleep apnea (OSA)

• Use of higher therapy pressures where a nasal or nasal pillow mask may leak

• Situations where mouth-breathing or nasal congestion is common

Exact pressure range and mode (CPAP, bilevel, etc.) are prescribed by the treating physician.

Magnet Safety Notice

Some Amara View configurations use magnetic headgear clips. Magnets may interfere with certain medical implants (for example, some pacemakers, neurostimulators, metallic implants, or other active medical devices). Patients and bed partners with such devices should review Philips’ latest magnet safety information and consult their clinician before using a mask with magnets.

What’s Typically Included

(Contents may vary by kit or reseller, but usually include:)

• Amara View mask frame

• Full face cushion (3 size) S/M/L

• Adjustable headgear with clips

• Short tube with swivel elbow

• User instructions / fitting guide